基于QT的嵌入式系统文件传输上位机软件设计

基于解决嵌入式设备远程文件传输的目的,采用QT编程技术设计了基于网络的嵌入式系统文件传输上位机软件.将MQTT通信协议和Ymodem文件传输机制相结合,借助QT官方库文件QTcpSocket、QtMqtt和QMqttClient以及自主实现Ymodem文件传输机制,实现了上位机的设计.该上位机可以在嵌入式设备处于较为复杂的环境时,以较小的网络传输代价,准确地完成唤醒和文件传输.通过上位机与嵌入式设备的联合调试可以得出,该上位机软件可以稳定完成文件的传输,并且可以长时间连续工作.     

基于1D CNN与XGBoost的恶意代码纹理检测

恶意代码数量已经呈现爆炸式增长,对于恶意代码的检测防护显得尤为重要.近几年,基于深度学习的恶意代码检测方法开始出现,基于此,提出一种新的检测方法,将恶意代码二进制文件转化为十进制数组,并利用一维卷积神经网络(1 Dimention Convolutional Neural Networks,1D CNN)对数组进行分类和识别.针对代码家族之间数量不平衡的现象,该算法选择在分类预测上表现良好的XGBoost,并对Vision Research Lab中的25个不同恶意软件家族的9458个恶意软件样本进行了实验.实验结果表明,所提的方法分类预测精度达到了97％.     

转锈稳锈材料在石油钻采设备薄壁件表面的应用

石油钻采设备中存在部分薄壁板件(厚度不超过3 mm),在喷砂或喷丸过程中极易造成变形,故实际生产中只能手工打磨清理。但是手工打磨效率较低,且一旦手工清理不彻底,会影响产品的防腐质量。为提升石油钻采设备中薄壁防腐质量,引进了新材料——转锈稳锈材料。通过控制变量,使用拉拔仪检测不同变量下涂层附着力;对转锈稳锈材料和传统的手工处理进行比较,考察其对不同品牌的油漆是否具有兼容性。研究结果表明:转锈稳锈材料与传统的手工打磨清理相比在增加漆膜附着力方面更具有优势,而且与大多数的油漆具有兼容性。     

深井超深井钻井堵漏材料高温老化性能评价

深井超深井钻进裂缝性油气层极易发生频繁的钻井液漏失,造成严重储层损害和重大经济损失。储层段钻进过程中经常发生重复性漏失,意味着仅用酸溶率、粒度分布等常规堵漏材料评价指标已不能满足钻井液漏失控制工程需要。笔者以塔里木盆地克深气田钻井常用的核桃壳、毫米级碳酸钙为研究对象,开展了堵漏材料高温老化评价实验。实验评价结果表明,在180℃的柴油中老化24 h后,核桃壳的颜色由黄色变成黑色,质量损失率为25.16 % ,摩擦系数下降28.24 % ,抗压强度下降21.21 % ;毫米级碳酸钙的颜色由白色变成淡黄色,质量损失率为2.47 % ,摩擦系数下降1.33 % ,抗压强度基本不变;由高温老化后的核桃壳和毫米级碳酸钙所形成的封堵层,其承压能力下降了48.84 % 。分析指出,堵漏材料高温老化失效是深井超深井裂缝封堵层结构破坏并在储层段发生重复性漏失的一个重要因素。     

不同热解工艺下半焦的微观结构特点及其对燃烧性能的影响

摘要：对比研究了3种直立内热炉半焦(熄焦方式分别为水泡熄焦、喷水熄焦及烟气干熄焦)及一种流化床热解半焦的微观结构及燃烧性能。通过对半焦组成、孔隙结构、有机官能团、碳化学结构及半焦微晶结构分析，获得了不同低温热解工艺半焦的组成及微观结构特点，明确了组成及微观结构与燃烧性能之间的关系。结果表明，不同热解工艺半焦的组成和微观结构差异明显，其对半焦的燃烧性能影响显著。干熄焦碳化学结构缺陷比例大，快速热解半焦孔隙结构发0达、挥发分高，与水喷焦相比水泡焦石墨化程度低；水喷焦燃烧性能优于水泡焦，干法所得半焦的燃烧性优于湿法；半焦的挥发分含量决定其燃点，在快升温速率条件下孔隙结构对半焦的燃烧性能影响较大，而慢升温速率条件下有序化度对半焦的燃烧性能影响较大。     

Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of 7050 alloy were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), selected area electron diffraction (SAED), hardness and electrical conductivity tests. Results show that after quenching in different ways, electrical conductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural aging state is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, the size of GP zones is 1.8–2.6 nm in matrix of the immersion quenched sample and it is 1.4–1.8 nm in matrix of both water mist and forced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 and its electrical conductivity is 30.5% (IACS) which are both higher than those of the immersion quenched sample. Therefore, water mist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.     

Numerical Study on the Morphology of a Re-Ignited Laminar Partially Premixed Flame with a Co-Axial Pilot Flame

Re-ignited partially premixed flame(PPF)is a quite extensive flame type in real applications,which is directly relevant to the local and global extinction and re-ignition phenomenon.The authors designed a model burner to establish laminar re-ignited PPFs.Numerical simulations were carried out to reveal the morphology of laminar re-ignited PPF.Based on the distributions of temperature,heat release and radicals,the morphologies of re-ignited flames were explored.W-shaped flames were formed under pilot-lean conditions.Line-shaped and y-shaped flames were formed under pilot-rich conditions.Both w-shaped and y-shaped flames had a triple-flame structure.The re-ignited flames can stand beyond the rich flammability limit.Additionally,OH distributions indicated both pilot flame and re-ignited flame well as it rapidly increased near the flame front.OH concentration did not increase visibly while CH2O concentration mildly increased during the mild re-ignition process in the pre-zone of the re-ignited PPF.According to the results of 0-D simulations using closed homogeneous reactor,both OH and CH2O reduced ignition time significantly.The results of this work are helpful for understanding re-ignited PPF more closely.